|
"good customer service & quality product"
thanks for your good customer service & quality product. we're very happy with our 1st chairmat, glad the 2nd has
already shipped, & we'll be ordering a 3rd one next week. by the way, not only am i pleased with your company's service
& products, i am also impressed with the website. i found it to be informative, accurate, and *very* user-friendly. we
had never ordered custom chairmats before, & i have absolutely no experience in this sort of thing, but your website
made it easy. thanks very much, amy ball'
|
|
Refer to the following instructions to properly measure your mat
|
NEXT:
>>After you have completed your measurements, please click to review
Available Materials
|
|
Step 1. Print your template
from the
Tools menu or make a drawing of the area you want to cover. This drawing
does not have to be to scale but should represent the basic shape of the mat. See the
pattern section to view available shapes. Opposite side totals of the mat should
match. (example - The total of the horizontal measurements across the top of the mat should equal the total of the
horizontal lines across the bottom of the mat. The same applies to the vertical lines on the right and left sides of the
mat.
|
|
Step 2. Using a tape measure, measure the
areas and write them down on the drawing as illustrated below. You will need this information later in the process as we
transfer this information from paper to the computer. Round your inside measurements (lip area) down to the nearest inch
mark. (example - Your measurement is 25 1/2" you would round it down to 25") This will allow enough clearance to install the
mat without damaging the furniture. This will not effect the effectiveness of the mat.
|
|
|
|
Step 3. Now that you have taken your measurements and
completed step 2, it is time to double check them and figure the overall size of the chairmat. Check opposite sides to make
sure that they total to the same #. If they do not adjust them before proceeding.
Step 4. Now lets figure the overall size of your mat as
illustrated below.
Step 5. ALLOW 10" FOR LIP AREA UNDER THE DESK.
Step 6. ALWAYS ROUND YOUR MEASUREMENT DOWN TO THE NEXT LOWEST INCH
MARK.
Step 7. USE TOTAL SIZE OF THE OVERALL MAT TO DETERMINE WHICH
PRODUCT SIZE TO ORDER.
|
EXAMPLE A: MAT WILL BE CUT FROM A
60" X 72 " PIECE OF MATERIAL
|
SINGLE LIP
|
|
|
|
EXAMPLE B: MAT WILL BE CUT FROM A 60" X 60 "
PIECE OF MATERIAL
|
|
*REMEMBER DRAWINGS DO NOT HAVE TO BE DRAWN TO SCALE.
JUST MAKE SURE THAT YOUR MEASUREMENTS ARE ACCURATE. DON'T FORGET TO ADD THE 10" FOR THE LIP AREA THAT GOES UNDER THE
DESK. ROUND DOWN YOUR MEASUREMENTS TO MAKE UP FOR FURNITURE CLEARANCE.
|
|
Wood Laminate mats
New! Black Chair mats
Chair Mat Casters
Entrance Mats
Anti-fatigue
Anti-Static Industrial
Food Service Mats
Industrial
|